Seat Boxes

The Octbox chassis, at the heart of all of our systems, is constructed using the most expensive materials and fabrication techniques currently available in seat box manufacture. It takes over 180 alloy welds to make an Octbox platform & height frame, and the leg clamps (used on both inner and outer legs) are housed in alloy as opposed to plastic. As such, they do not mark the legs. We guarantee that neither inner nor outer leg will slip. When you are sat on an Octbox, you can open the drawers and everything will stay in place without jamming, even when the modules are tipped upside down. There are up to 30 drawer combinations that can be attached to the height adjustment frame. All drawers and dividing trays are alloy. This ensures that their performance does not diminish if they get wet or are used in extreme temperatures.

4 Item(s)

per page
Grid  List 
  • Compact Seat Box

    MK18 Compact Seat Box

    Due in to the warehouse on 23rd May

    MK18 Octbox Compact Seat Box
    Designed for the mobile angler that needs something ultra light to carry on his shoulder.
    Essentially a strong stable seat with Bait waiter that acts as a height adjusable storage shelf when docked on the underside of the seat frame.
    The leg system has been tested with weights in excess of 1000kg (1T) without the adaptors slipping and the bespoke solid alloy grip feet have been designed to grip on slippery ground including wet greasy wooden boards.
     
    Available with or without drawers
     
    Pictures for illustration purposes only.   Bait boxes not included
     
    Weight -  Less baitwaiter and drawers 3.2Kg
     
    Baitwaiter weight 1.2kg
     
    Typical Drawer Module 2.5kg 
    Learn More
    Excl. Tax: £191.67 Incl. Tax: £230.00

  • Seat Box

    MK18 D25 Octbox Seat Box

    Octbox D25 MK18 Seat Box is a very versatile system that can be configured with multiple drawer setups in lightweight aluminium that can be opened without having lift your weight off the seat.  Sockets have been built into the front and rear of the seat box that allow the seat box to be converted to either a two wheel or 4 wheel barrow in under a minute.  The Octbox system is fitted with an extending tool / adaptor bar that can be fitted with posts or bump bar or keepnets as an alternative to fitting such accessories on to the footplate legs.   The advantage of fitting accessories to this extending system is you can move them further away from your feet, from just  a few Cms up to 45cm to give more room.   Moving support for the pole further out to the full extent can reduce the pressure on the elbow by up  to 30% which with the long pole can be several kgs. T
    The ultra strong chassis is fabricated from ultra light box alloy with over 230 precison welds to construct the chassis to give a system that is rock solid with no flexing and leg adaptors that can support in excess of 300kg without slipping.
    Quick Release Footplate -  Spring loaded plunger bolts allow the footplate to be closed or extended in seconds.  The alloy mesh plate in the footplate has been replaced with a alloy plate and plastic overlay which increases the strength of the footplate. 
    Keepnet Adaptor System - Adaptors have been added to both sides of the extending adaptor Frame that extends out of the footplate.  These combined with the stud welded to the front of the footplate and 3 x QF adaptors allow the seat box to be setup with three keepnets in seconds.   Additional keepnets can added buy adding a keepnet arm  (Not supplied) to the left or right footplate legs.   If you need the keepnets higher order 3 x 20cm posts which   will allow the keepnets to be set 8 inches higher.

    Learn More
    Excl. Tax: £412.50 Incl. Tax: £495.00

  • Octbox MK19 D36 Seat Box offer ends 15 Dec 18

    Octbox MK19 D36 Seat Box offer ends 15 Dec 18

     
    Configuration    It is possible to configure your D36 Seat Box to meet exactly what you need by selecting the numerous options in the drrop down menus.  Information on each option is as follows
    SEAT BOX OPTION - RIVER  Configured for anglers that fish mainly venues with difficult uneven banks. The footplate legs extend up to 3ft (90cm).
                                        COMMERCIAL (Com)  Configured for anglers that fish mainly venues with fairly level banks. The footplate legs extend up to 1ft 8"( 55cm).   
     
    Baitwaiter Accessory Pack - Available with or without a baitwaiter.  There is a special offer Accessory pack available until the 15 Dec which includes the Baitwaiter, Lid, Swivel tray and Extension tray for just £50. (saving £120) 
    Keepnet Adaptor Set - 3 x QF adaptors to fit to keepnets with one QF stud fixed to the front centre of the footplate and two adjustable adaptors fitted to the extending adaptor bar
    Footplate with Extending Adaptor Bar -   Ultra strong and light this bar can be used in a number of different ways.  The distance from the footplate legs is variable and at full extension acts as an addiutional load area when in barrow mode as well as a rock solid support for a bump / spray bar.  It can support even the heaviest poles in excess of 18m with only 5mm of movement.  Supporting long poles upto 50cm further out that conventional pole support systems reduces the pressure on the elbow by around 30% and makes controlling long poles in gusty conditions much easier.  The underside of the footplate has been fitted with guide blocks that ensure the footplate extends smoothly and stops in the correct position for the spring loaded fixing bolts to engage.  
     Height Adjustable Frame -  The 5 drawer setup can be moved up and down to achieve the perfect seating position before being locked inplace by four stainless steel headless allen key bolts using the allen key.   The frame also locks the middle in rear legs in conjunction with the main platform ensuring there is not a single mm of lateral movment on the heavy duty 36mm legs.  The rear of the frame has two 25mm posts that can be used to dock the baitwaiter or fix accessories such as a brolley or topkit set. 
    Leg Systems - The D36 is designed to replace the need for a platform and has been proven to be more stable than any platformdue to the legs being fixed in two points with powerful adaptors that can each individually take 285kg without slipping.   This combined with leg systems that can be fitted to the front that can go in excess of 6ft and legs for the rear that go to 90cm with options  for mud or high grip allow this system to get you setup in the most effective manner possible.  In certains circumstances this can be a massive advantage and the main reason for choosing the heavier duty D36 over the lighter D25.
    Weight -  The D36 with Baitwaiter system removed weighs 17.5kg which is still lighter than most other systems on the market supplied by the top ten brands.  
     
    Other accessories that you may wish to consider for the D36 is the Outrigger system which converts the system into a heavy duty incredibly stable platform with leg systems that can extend well over 6ft.   
    Learn More

    Regular Price: £850.00

    Special Price Excl. Tax: £625.00 Incl. Tax: £750.00

  • Light Fishing Seat

    MK18 Ultralight Seat Box 2 Drawer & Swivel Tray

    MK18 Octbox Compact Seat Box with 2 Drawers & Swivel Tray Configuration
    Designed for the mobile angler that needs something ultra light to carry on his shoulder.
    Essentially a strong stable seat with Bait waiter that acts as a height adjusable storage shelf when docked on the underside of the seat frame.
    The leg system has been tested with weights in excess of 1000kg (1T) without the adaptors slipping and the bespoke solid alloy grip feet have been designed to grip on slippery ground including wet greasy wooden boards.
     
    The Baitwiater when docked under the seat gives the angler a deep storage area deep enough for reels and bait boxes to be stored.   Access is achieved by uncliping and lifting the drawer module.  By having everything ready to go for the days fishing i.e bait, towel etc in the baitwaiter which can be undocked and fitted to the side in seconds means the angler can be setup and ready in just a couple of minutes.
     
    Supplied with 2 x 3cm deep Drawers
     
    Bait waiter and Swiveling Tray.
     
    Pictures for illustration purposes only.   Bait boxes not included
     
    Weight -  with Baitwaiter and Drawers fitted  8.5 Kg
    Learn More

    Regular Price: £338.00

    Special Price Excl. Tax: £245.83 Incl. Tax: £295.00

4 Item(s)

per page
Grid  List 
Back to Top